Working Hours : Mon-Fri : 08:00-18:00

Phone : +0086 13428601010 Skype : 86 13428601010

Email : [email protected]

Defoamer for Petroleum

Defoamer for Petroleum

Model No. 

BM-803/805

Appearance 

Transparent/Light yellow

PH Value 

5-8

Viscosity(25℃)

1000~1500mpa.s

Water-solubility

Dissolve in water easily

Note:Above data only shows the typical characteristics of this product, not represent the specification range



image.png

The crude petroleum has high viscosity, it always foams in primary and secondary gun barrels at combination station in winter, and the foams are stable, not easy to be removed, which can cause oil overflowing situation to the oil tank, and that will affect the general production. 

Due to there is high asphaltene and resin content in Gudao crude, and the large scale using of polyacrylamide, which not only makes the crude oil foam small and stable, but also thicken the bubble membrane and increase the membrane elasticity. Thus, it’s more difficult to cleaning the foam. 


For well solving above mentioned foams problem, Defond specially designed a high efficient diesel oil defoamer,  which aim at the characteristic during the oil-gas separation and transportation, to improve the working efficiency of separator, as well as the loading efficiency of oil tank truck and oil tanker. 

In addition that, this defoamer is also suitable to be used in other oily systems to control foams.   


5b067a322775b.png

(1) Fast defoaming ability, lasting foam suppressing effect, small dosage, not any effect to the basic property of foaming system.

(2) Good heat resistance, good chemical stability, non-corrosive, non-toxic, non-flammable, non-explosive, no adverse side affect.

(3) Comparable with top quality product on market, while the price is much more affordable. 

5b067a465e5c4.png

This defoamer is used to control foams problem during the the oil gas separation, gathering & transportation, extraction and canning of crude oil, and it’s also suitable to be used in other oily base systems to remove and suppress foams. 


5b0b9aa2d12aa.png                                                                5b0b9bb7380d4.png

 Apply to Petroleum                                                                                                                                        Apply to oil


5b067ac84fb6d.png

Usage: Direct add this defoamer to foaming systems, it also can be diluted to 5~10 times with kerosene or  dimethylbenzene. And when using in oil-gas separation, only need to add this defoamer at the first - stage separator.  


5b067adaa586d.png

1. Packing: 60KG, 200KG, 1000KG /Plastic drum, or as customer required. 

2. Storage: Non-dangerous goods, non-toxic, non-flammable. Should be stored sealed, in a cool, ventilated and dry place. Before used up, the container should be sealed tightly at around 25℃.

3. The shelf life is about 12 months.

4. Transportation: This product should be sealed well during transportation, preventing from moisture, water, strong acid & strong alkali.

5b067aeed880e.png

Please refer to Dongguan defeng defoamer Co.,Ltd  Defoamer Material Safety Data Sheet(MSDS)

24 hours hotline:0086 134 2860 1010】

GET IN TOUCH WITH US

Fill in the form below, and we'll get back to you within 24 hours.

Copyright © 2017 DONGGUAN DEFOND DEFOAMER CO.LTD.ALL RIGHTS RESERVED.