Working Hours : Mon-Fri : 08:00-18:00

Phone : +0086 13428601010 Skype : 86 13428601010

Email : [email protected]

Oil field defoamer

Oil field defoamer

Model No. 

BM-803/829

Appearance 

transparancy

PH Value 

6.5-7.5

Viscosity(25℃)

1000~1500mpa.s

Water-solubility

Dissolve in water easily

Note:Above data only shows the typical characteristics of this product, not represent the specification range



image.png

Oilfield defoamer is a kind of silicone polyether graft copolymerization defoamer, it can well solve the foams which forming in well drilling, avoiding causing side effect to the production. 

It can keep strong defoaming and foams suppressing ability in the conditions of high temperature, strong acid, strong alkali, or high shear, thus, this defoamer is widely used in various kinds of severe foaming systems to control foams in a wide temperature range. 

Furthermore, this defoamer still can solve the foams which produced by delay coking. 

Features: Low silicone content, small volatility, high temperature stability. 


5b067a322775b.png

(1)Fast defoamer ability, lasting foam suppressing effect. 

(2)Good dispersibility, easy and simple usage. 

(3)Small dosage, high efficiency, improve the lubricating property and cooling effect of slurry, largely improve the efficiency of slurry recycling using.

(4)Non-toxic, odorless, no pollution to environment. 


5b067a465e5c4.png

This defoamer is used in oilfield drilling mud, mortar, mining, beneficiation, and oil water separation process, etc. 


5b07c4cf6e854.png                                                      5b07c61b48390.png

 Apply to oil water separation                                                                                                Apply to oilfield drilling mud 

5b067ac84fb6d.png

Usage: 

Well drilling/well cementation: 

1.Direct add this defoamer to the well drilling mud as additives, when formulating mud, firstly add the defoamer to soil particle, stone particle. 

2.Also can add this defoamer to the slurry mixing trucks box. 

3.Recommended dosage: 0.02%~0.03%

Delay coking process: 

1.The foam forming in the coking tower, as the material viscosity largening and the solid forming, it would form a stable foam layer, using this defoamer can reduce the height of foam layer, and prevent the overflowing situation. This defoamer normally it’s added from the top of coking tower, and often use light gas-oil inject in, the main application of carrying oil is to keep the cleaning of pipeline and help the silicone oil to distribute to the foams. 

2.Recommended dosage: 3ppm~10ppm, before using, please dilute this defoamer with coal oil or diesel oil to 1~10 times. 

3.The specific usage shall be determined through the laboratory test.


5b067adaa586d.png

1. Packing: 60KG, 200KG, 1000KG /Plastic drum, or as customer required. 

2. Storage: Non-dangerous goods, non-toxic, non-flammable. Should be stored sealed, in a cool, ventilated and dry place. Before used up, the container should be sealed tightly at around 25℃.

3. The shelf life is about 12 months.

4. Transportation: This product should be sealed well during transportation, preventing from moisture, water, strong acid & strong alkali.

5b067aeed880e.png

Please refer to Dongguan defeng defoamer Co.,Ltd  Defoamer Material Safety Data Sheet(MSDS)

24 hours hotline:0086 134 2860 1010】

GET IN TOUCH WITH US

Fill in the form below, and we'll get back to you within 24 hours.

Copyright © 2017 DONGGUAN DEFOND DEFOAMER CO.LTD.ALL RIGHTS RESERVED.