Working Hours : Mon-Fri : 08:00-18:00

Phone : +0086 13428601010 Skype : 86 13428601010

Email : [email protected]

Metal Cleaning Defoamer

Metal Cleaning Defoamer

Model No. 

BM-120/121

Appearance 

Milk-white liquid

PH Value 

7-8

Viscosity(25℃)

500~1000mpa.s

Water-solubility

Dissolve in water easily

Note:Above data only shows the typical characteristics of this product, not represent the specification range


image.png

Aiming at the metal surface treatment agent and relevant application, Defond designs this high effective defoamer which is made from modified organic silicone. It can quickly remove various kinds of stubborn foams that caused by surface active agent, and it’s workable even if in the strong alkali condition and high temperature. 

With the advantage of lasting foam suppressing effect, it is adaptable with the craft requirement of various kinds of cleaning machine, such as ultrasonic cleaner, automatic assembly line cleaning machine, large size cleaning machine for textile industry, etc., and it will not cause any defeats such as oil spot, colour spot, and rust spot to the cleaned product. 

Thus, this product is suitable for using in all kinds of cleaning industries to control foams.

image.png

(1) Fast defoaming ability, lasting foam suppressing effect, small dosage, not any effect to the basic property of foaming system.

(2) Good heat resistance, good chemical stability, non-corrosive, non-toxic, non-flammable, non-explosive, no adverse side affect.

(3) Comparable with top quality product on market, while the price is much more affordable. 

image.png

This defoamer is suitable to use in : 

Steel plate cleaning agent, strong acid/strong alkali cleaning under high temperature, oil remover/ defatted powder, degreasing powder for alkaline aluminum component, common paint coating cleaning, electroplating, stainless steel cleaning, high pressure spray cleaning, spray degreasing cleaning, industrial water treatment, chemical cleaning, etc. 

5b0bcfb4b42bc.png                                                 5b0bcfdbeeae9.png

Apply to Metal Cleaning Defoamer                                                                      Apply to Metal Cleaning Defoamer

image.png

Usage: Directly

Usage: Direct add this defoamer to the foaming system or using after diluting. 

Recommended dosage:  0.1-0.5%.  

If need to dilute this defoamer, please use the diluted product as soon as possible. 

Suitable working temperature: <75℃. 

image.png

1. Packing: 60KG, 200KG, 1000KG /Plastic drum, or as customer required. 

2. Storage: Non-dangerous goods, non-toxic, non-flammable. Should be stored sealed, in a cool, ventilated and dry place. Before used up, the 

container should be sealed tightly at around 25℃.

3. The shelf life is about 12 months.

4. Transportation: This product should be sealed well during transportation, preventing from moisture, water, strong acid & strong alkali.

image.png

Please refer to Dongguan defeng defoamer Co.,Ltd  Defoamer Material Safety Data Sheet(MSDS)

【24 hours hotline:0086 134 2860 1010】


GET IN TOUCH WITH US

Fill in the form below, and we'll get back to you within 24 hours.

Copyright © 2017 DONGGUAN DEFOND DEFOAMER CO.LTD.ALL RIGHTS RESERVED.