Working Hours : Mon-Fri : 08:00-18:00

Phone : +0086 13428601010 Skype : 86 13428601010

Email : [email protected]

Desalination of Seawater Defoamer

Desalination of Seawater Defoamer

Model No. 

BM-104/868

Appearance 

Milk-white liquid

PH Value 

5-8

Viscosity(25℃)

1000~1000mpa.s

Water-solubility

Dissolve in water easily

Note:Above data only shows the typical characteristics of this product, not represent the specification range


image.png

Demineralization of power plant desalination treatment often produces a large amount of active organic substances inside, resulting in a lot of foam, seriously affecting the operation of the process and environmental hygiene. Seawater desalination defoamer is used to control foam and cracking in seawater distillation plants. Effective product. A new type of defoamer that can adapt to high temperature viscous, strong alkali, and heavy salt systems. It has good compatibility with most scale inhibitors, bactericides and algaecides. It is not affected by temperature and PH value. Defoaming, long-term suppression foam. No environmental pollution on sea water.

image.png

(1) Strong defoaming and foam suppression ability, no effect to the basic properties of the foaming system.

(2) Good heat resistance, good chemical stability, non-corrosive, non-toxic, non-flammable, non-explosive, no adverse side effects.

(3) Comparable to the top quality product on market, while the price is much more affordable.

image.png

Defoaming agent for seawater desalination in power plants is suitable for defoaming in seawater desalination, microbiological water treatment, crude oil extraction, multiple filtration, consolidation and transportation, and screening and separation of mineral resources. It is especially suitable for high salt-water content and high-temperature and high-pressure oil wells and offshore applications. Defoaming and foam suppression during platform oil recovery.

5b0cef124ee2a.png                                                                 5b0cef462806b.png

Apply to seawater desalination                                                                                                Apply to seawater desalination

image.png

Power plant seawater desalting antifoaming agent Diluent, water will be diluted 10-30 times after the product is added to the foaming system with a metering pump, or used directly. (Diluted after medium or high temperature water dilution)

image.png

1. Packing: 60KG, 200KG, 1000KG /Plastic drum, or as customer required. 

2. Storage: Non-dangerous goods, non-toxic, non-flammable. Should be stored sealed, in a cool, ventilated and dry place. Before used up, the container should be sealed tightly at around 25℃.

3. The shelf life is about 12 months.

4. Transportation: This product should be sealed well during transportation, preventing from moisture, water, strong acid & strong alkali.

image.png

Please refer to Dongguan defeng defoamer Co.,Ltd  Defoamer Material Safety Data Sheet(MSDS)

【24 hours hotline:0086 134 2860 1010】


GET IN TOUCH WITH US

Fill in the form below, and we'll get back to you within 24 hours.

Copyright © 2017 DONGGUAN DEFOND DEFOAMER CO.LTD.ALL RIGHTS RESERVED.