Working Hours : Mon-Fri : 08:00-18:00

Phone : +0086 13428601010 Skype : 86 13428601010

Email : [email protected]

Polycarboxylic Acid Defoamer

Polycarboxylic Acid Defoamer

Model No. 

BM-831/803/833

Appearance 

transparent/translucence

PH Value 

5-8

Viscosity(25℃)

800~1000mpa.s

Water-solubility

Dissolve in water easily

Note:Above data only shows the typical characteristics of this product, not represent the specification range


image.png

This defoamer is designed specially for polycarboxylic acid, the main composition is modified polyether substance. It's suitable to be used in environment friendly concrete admixture. 

With the advantages of stable product property, no delamination, no sediment, and no crystallization in winter, this defoamer is particularly suitable to make high quality water reducer of fair-faced concrete. 

image.png

1. Good resistant to high temperature, high shear.

2. Wide resistant to acid and alkali (pH range: 1~14), It's very suitable use in alkaline conditions to control foams. 

3. Excellent defoaming and foams suppressing ability, It's workable even in the extremely low concentration.

image.png

This product mainly apply to solve the foam problem during the production of producing cement mortar, water reducing agent, concrete, asbestos 

tile, calcium silicate board, putty powder, ore pulp, reinforcing agent etc. 

                                     5b1a2bdaa212f.png                                       5b1a2c296847c.png   

image.png

Please add directly into the foaming system after stirring evenly.  

Recommended dosage: 0.1~0.8% of total amount, but the optimum dosage should be confirmed based on the real testing.

Warm Tips:Different foaming system has different foaming solution, Please test our sample before bulk order, to confirm if this product can be suitable for your need or not.

image.png

1. Packing: 60KG, 200KG, 1000KG /Plastic drum, or as customer required. 

2. Storage: Non-dangerous goods, non-toxic, non-flammable. Should be stored sealed, in a cool, ventilated and dry place. Before used up, the 

container should be sealed tightly at around 25℃.

3. The shelf life is about 12 months.

4. Transportation: This product should be sealed well during transportation, preventing from moisture, water, strong acid & strong alkali.

image.png

Please refer to Dongguan defeng defoamer Co.,Ltd  Defoamer Material Safety Data Sheet(MSDS)

【24 hours hotline:0086 134 2860 1010】

GET IN TOUCH WITH US

Fill in the form below, and we'll get back to you within 24 hours.

Copyright © 2017 DONGGUAN DEFOND DEFOAMER CO.LTD.ALL RIGHTS RESERVED.