Synthetic Latex Antifoam
milk white/translucent/light yellow liquid
No dissolve in water
Note:Above data only shows the typical characteristics of this product, not represent the specification range
This defoamer is made of mineral oil-based high-efficiency, which is made of a variety of defoaming actives and refined by special techniques. The product does not contain organic silicon components, and it is safe for PVC and its products. Product chemical stability, acid and alkali, non-volatile,
1, no effect to the transparency, appearance color
2, no effect to the curing and curing time of the resin
3, no particles or floating particles, no effect to the quality of the product
4, fast defoaming, no residue, no floating, no floating oil, no shrinkage
5, good compatibility, good dispersion, no fish eye and pinhole phenomenon
Applied to pvc, milk polybutadiene styrene colloid foam suppression; also widely used in synthetic fiber, latex degassing system and other
Apply to synthetic latex industry Apply to natural/ synthetic rubber industry
Please mix well before using, can be directly added to the foaming liquid, the general use of the amount 0.2%-0.5% in the system's requirements,
the product can also be diluted with warm water about 50-60 °C 1:1
1. Packing: 60KG, 200KG, 1000KG /Plastic drum, or as customer required.
2. Storage: Non-dangerous goods, non-toxic, non-flammable. Should be stored sealed, in a cool, ventilated and dry place. Before used up, the
container should be sealed tightly at around 25℃.
3. The shelf life is about 12 months.
4. Transportation: This product should be sealed well during transportation, preventing from moisture, water, strong acid & strong alkali.
Please refer to Dongguan defeng defoamer Co.,Ltd Defoamer Material Safety Data Sheet（MSDS）
【24 hours hotline：0086 134 2860 1010】