Working Hours : Mon-Fri : 08:00-18:00

Phone : +0086 13428601010 Skype : 86 13428601010

Email : [email protected]

Strong Acid and Alkali Defoamer

Strong Acid and Alkali Defoamer

Model No.

 BM-661/662/663

pH Value

 6.5~7.8

Appearance

 Milk white/ Light yellow liquid

Ionicity

 Non-ionic

Water-solubility 

 Dissolve in water, excellent dispersibility

Viscosity(25℃)

 500~1500mpa.s



image.png

This cutting fluids defoamer is made of special modified polyether and fluorine-containing raw material by special technique.

It’s easily to dissolve in water, with the excellent heat resistance, strong acid and strong alkali resistance, it can keep high efficient foam control ability while under the conditions of high temperature, strong acid, strong alkali, high shear and high pressure, and it’s no demulsification, no oil floating.

It can be widely used in various kinds of severe foaming systems in wide temperature range.   

image.png

(1)Fast defoaming ability, lasting foam suppressing effect, small dosage, no any effect to the basic property of foaming system.

(2)Good dispersibility and penetrability, perfectly compatible with oil product and cutting fluid.

(3)Good heat resistance, good chemical stability, non-corrosive, non-toxic, non-flammable, non-explosive, no adverse side affect.

(4)It is workable under the conditions of acid, alkali, salt, electrolyte and hard water.

(5)Comparable with top quality product on market, while the price is much more affordable.

image.png

This cutting fluids defoamer is widely applies to:Metal processing; Cutting fluid; Microemulsion; High water content hydraulic fluid; Glycol hydraulic fluid; Solvent cleaning; Acid & alkali aqueous detergent; Coolant fluid; Grinding (oil) fluid; Wire cutting fluid; Automatic assembly line cleaning machine; Large scouring machine; Lubricants; Saponified oil; EDM working fluid; Drilling fluid; Fine grinding fluid; Etching solution; Electrolyte wire cutting fluid; Alkali extraction method technique; Dehydrant, etc.

image.png                                                                       image.png                                                                                  Apply to Metal Processing industry                                                                                                           Apply to Metal Processing industry  

image.png

Usage: Directly add this product to the foaming surface to remove foamRecommended dosage: 0.1~1%, the optimal dosage should be confirmed after the actual testing. 

image.png

1. Packing: 60KG, 200KG, 1000KG /Plastic drum, or as customer required. 

2. Storage: Non-dangerous goods, non-toxic, non-flammable. Should be stored sealed, in a cool, ventilated and dry place. Before used up, the container should be sealed tightly at around 25℃.

3. The shelf life is about 12 months.

4. Transportation: This product should be sealed well during transportation, preventing from moisture, water, strong acid & strong alkali.

image.png

  Please refer to Dongguan defeng defoamer Co.,Ltd  Defoamer Material Safety Data Sheet(MSDS)

【24 hours hotline:0086 134 2860 1010】                                                                            


GET IN TOUCH WITH US

Fill in the form below, and we'll get back to you within 24 hours.

Copyright © 2017 DONGGUAN DEFOND DEFOAMER CO.LTD.ALL RIGHTS RESERVED.