Tributyl phosphate defoamer is a plasticizer for nitrocellulose, cellulose acetate, chlorinated rubber and polyvinyl chloride, rare metal extractant, etc., developed, soluble in many organic solvents, insoluble Yushui is widely used in a wide range of industries. Due to its low surface tension, it is hardly soluble in water and can be used as an industrial defoamer, effectively defoaming the formed foam film in an unstable state.

(1) Strong defoaming and foam suppressing ability, low dosage. No effect to the product in producing.

(2)Good heat resistance, good chemical stability, non corrosive, non-toxic, no adverse side effects, non flammable, non explosive.

(3) Product quality is comparable to the best product in the market,while price is much more affordable.

This defoaming agent is suitable for using in building material, communal facilities, structural engineering, ACE coating, printing ink, adhesive, emulsion polymerization, etc. 

This defoamer should be diluted before using.

Recommended dosage:   

Building material---0.1~0.4%

Communal facilities/ Structural engineering/ ACE coating---0.1~0.5%

Printing ink---0.1~0.3%

Adhesive---0.1~0.3%

Emulsion polymerization---200~500ppm

Chemical combination/ Cement system---0.1~0.3%

 The optimal dosage should be determined through actual test

1. Packing: 60KG, 200KG, 1000KG /Plastic drum, or as customer required.

 2. Storage: Non-dangerous goods, non-toxic, non-flammable. Should be stored sealed, in a cool, ventilated and dry place. Before used up, the 

container should be sealed tightly at around 25℃.

3. The shelf life is about 12 months.

4. Transportation: This product should be sealed well during transportation, preventing from moisture, water, strong acid & strong alkali.

Please refer to Dongguan defeng defoamer Co.,Ltd  Defoamer Material Safety Data Sheet（MSDS）

【24 hours hotline：0086 134 2860 1010】