Working Hours : Mon-Fri : 08:00-18:00

Phone : +0086 13428601010 Skype : 86 13428601010

Email : [email protected]

Silicone Defoamer for PCB Board Cleaning

Silicone Defoamer for PCB Board Cleaning

Model No. 

BM-181/182/183

Appearance 

Milk white

PH Value 

5~8

Viscosity(25℃)

1000~1500mpa.s

Water-solubility

Dissolve in water, excellent dispersibility

Note:Above data only shows the typical characteristics of this product, not represent the specification range


image.png

This defoamer is made from modified silicon polyether by special technology, it’s a kind of organic silicone product, which is high efficient to remove foams in the etching process of PCB board production. 


Advantages: Excellent defoaming and foam suppressing ability, environmentally friendly, no silicone spots residue to the slot wall, no oil floating or adhesion situation causing during the production, and no any side effect to the following-up processing of the production. 

image.png

(1) Strong defoaming and foam suppressing ability, low dosage, no effect to the basic property of foaming system.

(2)Good heat resistance, good chemical stability, non-corrosive, non-toxic, non-flammable, non-explosive, no adverse side effects.

(3)Comparable to the top quality product on market, while the price is much more affordable.

image.png

This organic silicone defoaming agent is mainly applying to the PCB board cleaning, electroplate, water treatment, metal cleaning, and the whole PCB production , such as etching, film-stripping, developing, wastewater treatment, etc.


                5b051053db5e3.png                                                     5b05111419690.png

                     Applying to the PCB board cleaning                                                                    Applying to the film-stripping process of PCB board 

  image.png

 Usage:This defoamer can be used directly, or using after diluting its concentration to 2~3 times with water and stirring it evenly.

Recommended dosage: 0.~0.3%, but the optimal dosage should be determined through the actual foaming situation.

image.png

1. Packing: 60KG, 200KG, 1000KG /Plastic drum, or as customer required. 

2. Storage: Non-dangerous goods, non-toxic, non-flammable. Should be stored sealed, in a cool, ventilated and dry place. Before used up, the container should be sealed tightly at around 25℃.

3. The shelf life is about 12 months.

4. Transportation: This product should be sealed well during transportation, preventing from moisture, water, strong acid & strong alkali.

image.png

  Please refer to Dongguan defeng defoamer Co.,Ltd  Defoamer Material Safety Data Sheet(MSDS)

【24 hours hotline:0086 134 2860 1010】                                                                            


GET IN TOUCH WITH US

Fill in the form below, and we'll get back to you within 24 hours.

Copyright © 2017 DONGGUAN DEFOND DEFOAMER CO.LTD.ALL RIGHTS RESERVED.