Working Hours : Mon-Fri : 08:00-18:00

Phone : +0086 13428601010 Skype : 86 13428601010

Email : [email protected]

Professional producer Textile Size Mixture Defoamer

Professional producer Textile Size Mixture Defoamer

Model No. 

BM-868/105/805

Appearance 

Milk-white

PH Value 

5~8

Viscosity(25℃)

1000~1500mpa.s

Water-solubility

Dissolve in water, excellent dispersibility

Note:Above data only shows the typical characteristics of this product, not represent the specification range



image.png

This high efficient defoamer is developed specially for textile size mixture industry, which is based on the production technique of high temperature textile size mixture, printing & dyeing pigment, pigment printing paste and the dyeing pretreatment. It is made from modified polyether silicone and produced by special technique. 

It can well remove and suppress foam during the production of size mixture, as well as in the process of textile sizing.

Advantages: Small dosage, fast defoaming ability, lasting foam suppressing effect, good heat resistance, strong acid & alkali resistance, no demulsification, no effect to the size mixture quality. 

image.png

(1)Fast defoaming ability, lasting foam suppressing effect, small dosage, not any side effect to the basic property of foaming system.

(2)Good heat resistance, good chemical stability, non-corrosive, non-toxic, non-flammable, non-explosive, no adverse side affect.

(3)Comparable with top quality product on market, while the price is much more affordable. 

image.png

This textile size mixture defoamer applies to the textile size mixture, printing& dyeing pigment, pigment printing paste, dyeing pretreatment, cleaning detergent, water treatment, etc。


5afd36284c658.png                                                                                5afd363b775fa.png

Applying to Textile Size Mixture process                                                                                                   Applying to Textile Size Mixture process


image.png

Usage: Direct add this defoamer into the slurry pool after stirring evenly, it also can be used after diluting with water.

Recommended dosage: 0.1~0.5%, but the optimal dosage should be adjusted according to real defoaming situation.

Better to add this defoamer before the emulsion gets polymerization to get the best foam control effect. 

image.png


1. Packing: 60KG, 200KG, 1000KG /Plastic drum, or as customer required. 

2. Storage: Non-dangerous goods, non-toxic, non-flammable. Should be stored sealed, in a cool, ventilated and dry place. Before used up, the container should be sealed tightly at around 25℃.

3. The shelf life is about 12 months.

4. Transportation: This product should be sealed well during transportation, preventing from moisture, water, strong acid & strong alkali.

image.png

Please refer to Dongguan defeng defoamer Co.,Ltd  Defoamer Material Safety Data Sheet(MSDS)

【24 hours hotline:0086 134 2860 1010】




GET IN TOUCH WITH US

Fill in the form below, and we'll get back to you within 24 hours.

Copyright © 2017 DONGGUAN DEFOND DEFOAMER CO.LTD.ALL RIGHTS RESERVED.